The wood grinder is a very grounded piece of wood processing equipment that uses a large amount of wood products. This also leads to a large amount of waste wood and branches being produced every year. The reason why waste wood is called waste wood is not that it is really useless, but that it is old. As for branches and leaves, they are generally considered useless, but they are not. After the treatment of the wood grinder, these materials are really useful.

They can be used to make biomass pellet fuel, but also to make furniture and various wood products.

Wood shredders

The wood grinder uses the blades to cut the raw material against the shock and ultimately to crush it. Over time, the blades will wear out from the constant grinding against the raw material, which can lead to damage to the blades. Therefore, we should always check the wear and tear of the shredder blades. If the blades are found to be badly worn, they must be replaced in time.

A gentle reminder: we can add lubricant to the blade surface to slow down the rate of blade wear and thus extend the life of the blade.

Knife cutting speed and output

The higher the speed of the wood grinder blade, the higher the output of the equipment. Many people have this misconception. In order to increase the output, I privately changed the knife speed, who knows that the output did not increase, the finished product crushing effect is also greatly reduced.

In fact, the speed of the cutter plate of the wood grinder has a different range of adjustment depending on the model. Once the established range is exceeded, there will be side effects.

Warm tip: The rotational speed of the knife head is not a condition to determine the output of the wood grinder